Kenmore 625.38356 Owner's Manual page 8

Suggested Slab Foundation Installation
water heater
kitchen
Plug the softener transformer
into an inside, 120 volt 60Hz
electrical outlet. If an outside
outlet is used, be sure it has
approved weather protection.
WATER SOFTENER
(install in garage, car port,
or other sheltered area)
bathroom
outside
-soft
bypass
valve outside
-soft
Run drain tubing to laundry tub or
p-trap inside home, if possible.
Otherwise, run to a dry well.
outside
- hard
outside
- hard
water in
For outside hard
water, trench under-
ground as needed.
FIG. 4
DRAW IN YOUR PIPES
AND FITTINGS
Draw the plans for your "IN" and "OUT"
piping here. Include all pipe, fittings and
accessories you will use.
Make a list of all materials you will need
and buy them before you begin to install
the water softener.
120V - 60Hz
U
Electrical
Outlet
Left
Valve Outlet Side
Your House Main Water Pipe
Right
* In what direction does the water flow?
Be sure to plan "IN" and "OUT" piping so water
flow is to the softener valve inlet. Plan a
crossover if flow is from left to right.
CROSS-OVER
Main Water Pipe
Raw
Soft Water
Valve Inlet
Outlet Inlet
To Water Softener
FIG. 5
Questions? Call The Kenmore Water Line 1-800-426-9345
8