Advertisement
H
Remove
Firebox
from
Cabinet
[]
Unscrew
and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet.
Remove the crossbar,
[]
Carefully
lift the cabinet
up from the firebox
and set on cardboard.
Remove all foam packing
from
cabinet.
[]
Cut fastening
straps on lid handle.
Raise lid and remove and unpack
parts inside firebox.
Crossbar
Install
Control
Knobs and Casters
[]
Push the Main Burner Control
Knobs and Back Burner
Control
Knob onto the valve stems.
See Inset
1. The small knob goes onto the labeled valve stem for the rotisserie
burner.
[]
Place the Cabinet
Assembly
upside down and attach the 4 Casters to the bottom
using 16 Phillips
Head Bolts (M6x16mm).
Use care to install
each Caster into the correct
position.
See Inset
2.
Phillips
Head Bolt M6x16mm
qty:
16
Standard
Caster
Main Burner Control
knob
qty:
4
Locking
Standard
Caster
Back Burner Control
Knob
qty: 1
Inset
I
Caster
Inset
2
10
g Swivel Caster
Advertisement
