Advertisement
_1_
Attach
Side Burner
Control
Knob and Side Burner
Ignition
Wire
[]
Slide the side burner
ignition
wire through
the hole located
in the lower left front corner of the
Firebox Assembly
and over the side burner
igniter
connector.
See Insets
1 and 2.
[]
Push the Control
Knob onto the valve stem.
See Inset
3.
r
Side Burner Control
Knob
qty:
1
Inset
3
Inset
2
Inset
1
Install
Side Shelf
Frame
to Firebox
[]
Unscrew the 2 Phillips
Head bolts ¼" from the upper left and right corner holes in the right side of
the firebox
as shown in Inset
1. The bolts extending
out of the firebox
sides are to attach
the side
shelf frame.
[]
Slide the upper holes of the side shelf frame over the heads of the 2 Phillips Head Bolts and drop
down.
[]
Use 2 Phillips Head Bolts (M6x16mm)
and 2 Washers
(M6) to attach the lower holes in the side shelf
frame to the firebox
as shown
in Inset
2. Tighten
the upper
bolts after the 2
lower bolts are tight.
[]
Use 2 Phillips Head Bolts (M4x8mm)
and 2 Lock Washers
(M4) to attach the lower holes in the Side
Shelf Front Panel to the firebox,
See Inset
3.
Phillips
Head Bolt M6x16mm
qty:
2
©
Lock Washer:
M6
qty:
2
Phillips
Head Bolt M4x8mm
Qty: 2
©
LOCK Washer
M4
qty:
2
Inset
1
Inset
2
Inset
3
16
Advertisement
