Advertisement
Positioner
Used to set the key positions.
Rotary encoders [R1 ~ R4]
Used to adjust the video levels and modify settings.
Audio faders [A1 ~ A4]
Used to adjust the audio levels.
ESC
Used to cancel the setting panel.
DIG
Used to switch to the manual digitizer.
P1 ~ P4
Used to switch to the clip editor.
SEQ
Used to switch to the sequence editor.
UNDO
Used to undo the operation performed immediately
before.
REDO
Used to redo the operation which was undone by
"UNDO".
TAB
Used in the same way as the "TAB" key on a
keyboard. It jumps ahead to the next item.
HOME/END
Used to jump to the start or end point (toggle
operation) of a sequence.
GOTO/SEARCH
Used to jump to a mark in or out point (toggle
operation).
ZOOM IN (ZOOM OUT)
Used to zoom in on (magnify) the time line. Used to
zoom out when it is pressed while "SHIFT" is held
down.
DIVIDE (MARK CUE)
Used to divide a clip.
REPLACE/ASSEM (EXCHANGE)
Used to paste (replace) clips into a sequence. With
Record To Video, it switches to the assemble mode.
INSERT/INSERT
Used to paste (insert) clips into a sequence. With
Record To Video, it switches to the insert mode.
5
DELETE/IMMED (BS)
Used to delete clips. With Record To Video, it
switches to the immediate mode.
When it is pressed while "SHIFT" is held down, the
two keys function as the backspace key.
REMOVE/REC (EXIT)
Used to remove clips (without moving the following
clips forward to close up the gaps left). With Record
To Video or the batch digitizer, it starts recording.
When it is pressed while "SHIFT" is held down, the
window with the focus is closed.
Wipe lever
Used to set wipe or the DVE preview or learn setting.
PLAY
Used to play a tape in an external VCR when the
time line or clips are to be played.
PREV
Used to preview wipe or DVE.
Used to rewind the tape in the external VCR.
Used to advance the tape in the external VCR frame
by frame (in the reverse direction).
/STBY
Used to set the external VCR to the still mode. When
it is pressed while "CTRL" is held down, the external
VCR is switched between the standby ON and OFF
mode.
3
Advertisement
