Advertisement
Connection with DVEdit
Connect one end of the VCR/JOGPAD cable (accessory supplied with the AY-RP500) into the JOGPAD connector (mini
DIN 8-pin) on the JOG board and the other end into the connector (D-sub 9-pin) on the rear panel of the jog pad.
Tighten the screws on the parts connected to the rear panel of the jog pad.
Plug one end of the trackball connecting cable (supplied accessory) into the connector on the rear panel of the jog pad
and the other end into the MOUSE connector on the rear panel of the computer. Once the trackball has been
connected, it is not possible to use another mouse (PS/2), serial mouse or USB mouse at the same time as the trackball.
However, the tablet (ArtPAD made by WACOM) can be used simultaneously.
The power must be turned off before these cables are connected.
It is necessary to first mount the professional jog pad ROM kit (AY-PB502) when DVEdit (AY-RP500) is used.
Track Ball Cable
(Supplied
accessory)
Jog pad
9
MOUSE connector
Tighten these screws after
plugging in the connector.
JOG Board
VCR/JOGPAD
Cable
MAIN UNIT
MOUSE
JOG PAD
Computer (Rear panel)
JOGPAD
Mini DIN 8-pin
Connector
7
Advertisement
