Sony MZ-S1 Service Manual page 27

OVERALL ADJUSTMENT MODE
• Configuration of Overall Adjustment Mode
Overall adjustment mode
(Title display)
N > key
Protect switch
ON
key
x
key
x
Protect switch
OFF
key
N >
key
x
x key
[MENU/ENTER]
key
key
x
[END SEARCH]
key
x key
[Test mode $display check mode%]
. key
CD overall
adjusting
All item NG item exists
OK or x key
CD overall
adjustment
NG
CD overall
adjustment
OK
key
N >
MO overall
adjusting
NG item exists
or x key
MO overall
adjustment
NG
MO overall
adjustment
OK
Electrical
offset
adjustment
Temperature
correction
and
Power supply
adjustment
auto item feed
• Overall adjustment mode (title display)
Set LCD display
000
Assy**
: (Disc mark) At end of power supply adjustment: Outside lit
At end of electrical offset adj.: Inside lit
** : Left side = MO overall adjustment information
F * : MO overall adjustment completed
1 * : Manual adjustment exists (overall adj. not completed)
0 * : Not adjusted
Right side = CD overall adjustment information
* F: CD overall adjustment completed
* 1: Manual adjustment exists (overall adj. not completed)
* 0: Not adjusted
Note: Adjust the CD first, when performing adjustment.
• Electrical offset adjusting method
Caution: The electrical offset adjustment must be made with no
disc loaded.
1. Make sure that the power supply voltage is 3 V.
2. Set the test mode (see page 15).
[VOL --]
3. Press the or
.
mode.
Set LCD display
000
Assy11
[MENU/ENTER]
4. Press the
Set LCD display
035
Ofst**
5. Electrical offset adjustment is over, if the following display
appears.
Set LCD display
000
OfstOK
• Adjustment Method of CD and MO Overall Adjustment
Mode
1. Set the test mode (see page 15).
[VOL --]
2. Press the or
.
ment mode.
Set LCD display
000
Assy11
MZ-S1
key to activate the overall adjustment
key on the remote commander.
key to activate the overall adjust-
27