Grant Access - Siemens SPCK420 User Manual

SPCK420/421/422 LCD-Keypad - User Manual
User programming via the keypad > User menus > GRANT ACCESS

GRANT ACCESS

When engineer or manufacturer access has been allowed, the keypad displays the text ENGINEER ENABLE or MANUFACT
ENABLE. Once access has been granted, the user cannot access the system until the engineer has logged off.
To allow engineer access:
1. Scroll to GRANT ACCESS and press SELECT.
2. Select to ALLOW ENGINEER and select ENABLED.
3. To disallow engineer/manufacturer access, follow the same path and toggle to DISABLED and press SELECT.
User types Standard and Manager can access the embedded web server on the SPC . When programming with a browser
interface it is important to remember to click Save to ensure the changes made on the web page are saved on the system. To
view the current programming values on a web page, click Refresh .
User programming can be performed from the browser by entering a valid user ID and password in the logon screen. The User
programming options presented in the browser are also available from the keypad by entering the user password.
New users with unique passwords can be created in Engineer Programming. See page
© Siemens Industry - 11-24-2009