Removing And Installing The Ring Gear Bearings - Yamaha BT1100 2002 Service Manual

Hide thumbs Also See for BT1100 2002:

Table of Contents

• final drive pinion gear

(with the special tools)

Crankshaft installer bolt adapter 1

Armature shock puller 2

Always use new bearings.

The final drive pinion gear should only be

removed if ring gear replacement is neces-

REMOVING AND INSTALLING THE RING

GEAR BEARINGS

• oil seal 2

(with an appropriate press tool 4 and an

appropriate support for the final drive hous-

a. Heat the final gear case to approximately 150

°C (302 °F).

b. Remove the bearing outer races with an

appropriately shaped punch 2.

c. Remove the inner race from the final drive pin-

The removal of the final drive pinion gear bearing

is a difficult procedure and is rarely necessary.

Chapters

Table of Contents