Table of Contents
Advertisement
Post-motor filter:
NOTE: This is located on the back of the vacuum cleaner.
Release the post-motor cover by pressing down on the catch at the top of the cover.
Remove the filter and case by pulling away from the casing then separate the filter from the case.
o
The post-motor filter can be rinsed in warm water (max 40
C). Allow to air dry for at least 24 hours before
replacing.
Return the post-motor filter to the casing and re-fit to the back to the vacuum cleaner.
8. Storage
IMPORTANT: Always unplug the vacuum cleaner from the electrical outlet and
rewind the power cord as directed before storing.
NOTE: Always store the vacuum cleaner base down.
Advertisement
Table of Contents
