Picking Upbobbin Thread - Kenmore 1206 Instructions Manual

I0
PICKING UPBOBBIN THREAD
Rinse presser foot lever.
Hold needle thread loosely in left hand and rotate
hand wheel toward you one complete turn.
Bring bobbin thread up by pulling upper thread (See
illustration).
Place threads back under presser foot.
ADJUSTING THEPRESSURE
OFTHEPRESSER FOOT
Push down outer ring of presser foot pressure regulator
_See illustration). This will release pressure of presser
foot. To increase pressure, push down inner pin until
suitable pressure is obtained.
For ordinary sewing, the inner pin should be about half
way down. When sewing multiple thickness or heavy
matenat, reduce the pressure. Increase it when sewing
sheer fabncs.
Insufficzent pressure may cause skipped stitches or
difficulty in guiding the fabric. If feed dog or presser
foot marks appear on the fabric, reduce the pressure.