Scanning With The Stand - Motorola DS4208 Product Reference Manual

Scanning with the Stand

When the digital scanner is placed in the gooseneck Intellistand it operates in continuous (constant-on) mode,
where it automatically decodes a bar code presented in its field of view.
To operate the scanner in the stand:
Ensure the scanner is properly connected to the host (see the appropriate host chapter for information on host
1.
connections).
Insert the scanner in the gooseneck Intellistand by placing the front of the scanner into the stand's "cup."
2.
Cup
Inserting the Scanner in the Gooseneck Intellistand
Figure 2-4
Adjust the scan angle by bending the stand's flexible "gooseneck" body.
3.
Present the bar code.
4.
Upon successful decode, the scanner beeps and the LED turns green. For more information about beeper and
5.
LED definitions, see Table 2-1
Scanner holder
Flexible "gooseneck"
and Table 2-2.
Scanning 2 - 7