Multicode Concatenation Symbology; Multicode Troubleshooting; Troubleshooting Multicode Expression Programming - Motorola DS4208 Product Reference Manual

4 - 32 DS4208 Digital Scanner Product Reference Guide

Multicode Concatenation Symbology

Parameter # F1h D2h
Use this parameter to specify how to transmit the concatenated bar codes decoded as specified by the
Expression. Multicode Mode Concatenation
Concatenation as Code 128
Concatenation as Data Matrix

Multicode Troubleshooting

Troubleshooting Multicode Expression Programming

Use the following suggestions if encountering problems programming a multicode expression:
•
Ensure the expression is valid. Invalid expressions are rejected during programming. When an expression is
rejected the previous expression remains intact. If after programming the expression the digital scanner can
still decode any bar code, the expression was possibly rejected.
•
When programming the multicode expression via parameter bar code, the digital scanner generates beeps. If
any of the following beeps do not sound during programming, an error occurred (see
and Table 2-2 on page 2-4
• Scanning the
• Scanning each value of the expression produces a two-tone (same pitch) beep.
• Scanning the
•
Check the expression for syntax errors.
must be enabled to use this option.
(01h)
(03h)
for error indicators):
bar code produces a two-tone (same pitch) beep.
Multicode Expression
bar code produces a four-tone (high-low-high-low) beep.
End Of Message
*
Concatenation as PDF417
(02h)
Concatenation as Maxicode
(04h)
Table 2-1 on page 2-2
Multicode