Hard Disk Setup - Panasonic AY-RP500 Installation Manual

HARD DISK SETUP

There are two different methods for hard disk setup.One
is for installing a hard disk inside the personal computer,
and one is for using an external hard disk unit (optional).
When installing a hard disk inside the
personal computer
SCSI ID Setting
Set the SCSI IDs as shown below. "0" is recommended.
When setting another number and using an optional hard
disk box, make sure that none of the SCSI IDs are dupli-
cated.
Note: Set SCSI ID to other than "7".
Push in the jumper pin here.
20
Termination Setting
Set the termination as shown below.
Insert jumpers.
J2
J6
Drive
Front
Note: When two hard disks are installed, make their set-
tings for the SCSI IDs and terminations the same.
Installing the hard disk
Note: Only SCSI hard disk drives with a capacity of 2G
or 4G can be installed inside the personal computer.
Operation is not guaranteed if a hard disk with a
larger capacity (for example, 9G) is installed. To
install a hard disk with a larger capacity, use the
hard disk box (optional).
Note: Up to two SCSI hard disks can be installed inside
the personal computer. Operation is not guaranteed
if three or more hard disks are installed. Here, set
the same number for the SCSI IDs of both hard
disks.
Indicates where jumper
is to be inserted.