Disposal Of Packaging; Requirements For The Setup Location - Silvercrest KH 2430 Operating Instructions Manual

Disposal of packaging

GB

Requirements for the setup location

42
The packaging protects the device from transpot damages. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces generated waste. Dispose of packaging material that is no longer needed
according to the regionally established regulations.
NOTE
► If possible preserve the device's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the
device properly for return.
For safe and trouble free operation of the device the setup location must fulfi ll the
following provisions:
■ The device must be placed on a fi rm, fl at and level base.
■ Do not place the device in a hot, wet or very damp environment or in the vicinity
of fl ammable materials.
■ Do not remove the device's feet. Otherwise proper air circulation can not be
guaranteed.
■ The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.
■ The surface areas of furniture may possibly contain components that could aff ect
the device's rubber feet, softening them. If necessary place a base under the
device's feet.
■ Operating temperature range: +5 to +40 °C
■ Humidity (no condensation): 5 - 90 %
Setting up and connecting
USB Record Player KH 2430