Table of Contents
Advertisement
6.2
Replacement of the primary HDD in
SISTORE AX8/AX16 250/100 V2.8
Siemens Building Technologies
Fire Safety & Security Products
These instructions describe the replacement of the primary HDD unit in the
housing of a Digital Video Recorder of type SISTORE AX8 250/100. When
installing a HDD unit in AX16 250/100 proceed in the same manner.
Installation and replacement of hard disk drives
1. First shutdown the device and
disconnect from the power supply.
2. Remove the screws marked in the
picture on the rear (3) and on both
sides of the SISTORE AX (8).
3. Lift up the housing cover at the rear of
the SISTORE AX, and lift it off.
4. Remove the hard disk frame with the
primary HDD by loosening the two
screws – see marking.
5. Push the frame forward and lift it off
from the housing.
6. Remove the cabling.
19
03.2009
Hide quick links:
Advertisement
Table of Contents
