Kenwood CT/KXF-W Instruction Manual page 17

4
Start recording.
1
Press the REC/ARM (¶) key.
CT-2050/KXF-W6010
CT-203/KXF-W4010
2
Play the music source from the begin-
ning.
Bias level adjustment (Deck B of the CT-2050/KXF-W6010 only)
The MODE key can be used to adjust the bias level.
1
Press the MODE key and select the "BIAS"
mode.
2
Adjust the bias level.
The high frequency
decreases.
How to use the MPX FILTER key
Use this function when recording a radio (FM) broadcasts.
¶
REC/ARM
Press once.
MODE
REC LEVEL/BAL.
/BIAS
∞ ∞
MIN/L MAX/R
The high frequency
increases.
MPX FILTER
How to record (CT-203/KXF-W4010; Deck B only)
÷ Recording will start.
÷ The deck enters the stop mode automatically when the tape has
been recorded till the end.
Each press of the MODE key changes the setting.
1 "LEVEL" lights up: Recording level setting mode
2 "BAL." lights up: Recording balance setting mode
3 "BIAS" lights up: Recording bias setting mode (Deck B of the
CT-2050/KXF-W6010 only)
4 "LEVEL","BAL.",and "BIAS"go off: Counter display mode
÷ To adjust the bias level, play back the recorded sound and adjust to the
suitable level.Repeat if necessary.
÷ The bias can be adjusted to a value of ±3.
Depending on the tuner, a recorded FM broadcast may
produce a "beat" sound. In this case, press the MPX FILTER
key before recording. To cancel, press the MPX FILTER key
again.
CT-2050/203/KXF-W6010/W4010 (En/M)
lights up
lights up
17