Controls And Indicators (Ct-401/Kxf-W1030) - Kenwood KXF-W1030 Instruction Manual

Controls and indicators (KXF-W1030 / CT-401)
8
2
POWER
- ON – OFF
1 ¡
7 3
3
1 Deck A
Playback-only tape deck.
2 POWER switch:
Press to turn power - ON and – OFF.
3 Deck A operation keys
3 key :
Play key.
1 key:
Rewind key. (for fast winding of tape
toward the left reel seen from you)
33 key:
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
7 key:
Stop key.
4 Cassette holder (Deck A)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
5 Cassette holder (Deck B)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
DISPLAY
PEAK LEVEL METER
(dB)
DOLBY NR
!
1
PUSH/OPEN
0
A
TAPE
FULL LOGIC CONTROL
4
6 Deck B operation keys
3 key :
Play key.
1 key:
Rewind key (for fast winding of tape
toward the left reel seen from you)
33 key:
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
7 key:
Stop key
¶ REC/ARM key:
Press in stop mode to start recording
or press in record mode to let the
recording pause after leaving a non-
recorded blank of 4 seconds.
8PAUSE key:
Press to let recording pause temporarily.
7 REC LEVEL control:
Adjusts the recording level.
—5 0 +3 +6 (dB)
DUBBING
@
0
FULL LOGIC CONTROL
indicator : (Recording indicator)
DOLBY NR reference level
DISPLAY
9
PUSH/OPEN
0
PEAK LEVEL METER
(dB) —5 0 +3 +6 (dB)
DOLBY NR DUBBING
DOLBY NR DUBBING
1 ¡ 8 ¶
PAUSE REC/ARM
B
TAPE
7 3
REC LEVEL
DPSS
MIN MAX
5 6 7
8 DUBBING key:
Press to start tape dubbing.
9 DOLBY NR key:
Press to select the Dolby Noise Reduction
mode.
0 Deck B
Tape deck which is capable of both
playback and recording.
! DOLBY NR indicator
@ DUBBING indicator
8