Table of Contents
Advertisement
Preparing to Play Tracks
Preparation
÷ Turn the unit ON.
(For U.S.A. and Canada)
POWER
ON/STANDBY
GRC operation
: Complete the procedure in "Basic Operations
for the Graphical Remote Control Unit (GRC)"
Loading/unloading discs
1
Load/unload a disc.
1
Open the tray.
2
Place/remove a disc.
Label side
Disc tray
3
When loading or unloading other discs
2
Close the tray.
ALL TEXT SEARCH
For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.
After loading all the discs, operate in stop mode.
RC operation
GRC operation
ALL TEXT
SEARCH
FRAME/
TIME
÷ The information read into the CD player is cleared when the
tray is opened. Therefore, perform this operation again if the
tray was opened.
(For other countries)
ON/STANDBY
90
0
DISC SKIP
0
Remote control unit only
Mode
ENTER
Text
ENTER
All Text Search
ENTER
: Keys and control used in the operations described on this page.
÷ Do not touch the played side of disc.
÷ Loading two discs together will cause malfunctioning.
÷ Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
÷ A single CD (8 cm disc) can also be played.
÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
÷ When loading/unloading a disc while the tray rotates, a malfunction
might occur. Load/unload the disc when the tray does not rotate.
1
2
All DISC indicators "
" light regardless of how many discs are
present.
Search in progress or
reading information
D
I
S
C
R A
«
D
1
: CD
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the "D1 : NO CD TEXT" display will
appear.
D-R350 (En)
DISC
3
4
5
Blinks.
E
D
I
N
G
T
E
X
T
When the disc is CD-TEXT
11
Hide quick links:
Advertisement
Table of Contents
