Memory Recall Mode; Display Type Selection - Kenwood eXcelon KDC-X991 Instruction Manual

General features

Memory Recall mode

Recall the value in the memory by the memory
mode.
1
Select the source to adjust
Press the [SRC] button.
2
Enter recall mode
Using the Control knob, select "DSP" > "PRESET"
> "RECALL".
For the operation method, refer to <Function
Control mode> (page 11).
3
Select the recall item
Select the recall number using the Control
knob.
Press the Control knob.
Recall the value put by <Memory mode> (page
15).
"Recall?" is displayed.
4
Recall the Audio Preset
Select "YES" using the Control knob.
"Recall Completed" is displayed.
5
Exit Memory Recall mode
Press the [FNC] button.
16
|
English

Display Type Selection

Changing the display mode.
1
Enter Display Type Selection mode
Using the Control knob, select "DISPLAY" >
"TYPE".
For the operation method, refer to <Function
Control mode> (page 11).
2
Select the Display Type
Turn the Control knob.
Select from the following display types:
Display Display Type
"TYPE SELECT [A]"
!
"TYPE SELECT [B]"
"TYPE SELECT [C]"
0
"TYPE SELECT [D]"
"TYPE SELECT [E]"
@
3
Exit Display Type Selection mode
Press the Control knob.
4
Enter Display Mode Selection mode (Display
Type B/ Display Type C only)
Using the Control knob, select "DISPLAY" >
"MODE".
9
1
9
2
3
3
9
2
3
3
9
7
7
8