Amp Control; Receive Mode Setting; Electronic Serial Number; (Esn) Display - Kenwood KDC-MP635 Instruction Manual

Function of KDC-X791
When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.
1
Select AMP Control mode
Turn the Control knob.
Select the "AMS Control" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards up or down.
⁄
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards right or left.
5
Exit AMP Control mode
Press the [FNC] button.
⁄
• You cannot use the LX AMP operation during standby
mode.
In FM reception
CRSC (Clean Reception System Circuit)
Temporarily have reception alternate from stereo to
mono to reduce multi-path noise when listening to
the FM station.
Display
"CRSC : ON"
"CRSC : OFF"
⁄
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Setting
The CRSC is ON.
The CRSC is OFF.
In HD Radio mode

Receive mode Setting

Sets the receive mode.
1
Select the Receive mode
Turn the Control knob.
Select the "Receive Mode" display.
2
Enter Receive mode
Press the Control knob for at least 1 second.
3
Set the Receive mode
Push the Control knob towards up or down.
Each time you push the knob, the Receive mode
alternates between the modes shown in the table
below.
Receive mode Display
Auto mode "Auto"
Digital "Digital"
Analog "Analog"
4
Exit Receive mode
Press the [FNC] button.
⁄
• Even if the Receive mode is set to "Auto", when the Ball
game mode program (non-delayed broadcast program)
is received, the Receive mode will automatically switch
to Analog broadcast only.
In Satellite radio source
Electronic Serial Number (ESN)
display
Displaying the Electronic Serial Number.
Display
"ESN=************"
⁄
• Electronic Serial Number (ESN)
It is important to retain the unit serial number and the
electronic Satellite radio Identification number for service
activation and potential service changes.
Operation
Analog broadcasts and digital
broadcasts will be switched
automatically.
When both are being transmitted,
the digital broadcast will have
priority.
Digital broadcasts only.
Analog broadcasts only.
37
|
English