Display Type Selection; Status Setting - Kenwood KDC-MP635 Instruction Manual

Display Type Selection

Changing the display mode.
1
Enter Display Type Selection mode
Using the Control knob, select "DISP" > "TYPE".
For the operation method, refer to <Function
Control mode> (page 10).
2
Select the display Type
Turn the Control knob.
Select from the following display types:
Display Mode Display
"TYPE SELECT [A]"
1
"TYPE SELECT [B]"
1
"TYPE SELECT [C]"
0
0
0
"TYPE SELECT [D]"
!
"TYPE SELECT [E]"
8
"TYPE SELECT [F]"
9
1 Graphic display part
2 Status display
3 Text display part
4 Upper text display part
5 Middle text display part
6 Lower text display part
7 Text display part
8 Graphic display part
9 G-Analyzer display part
0 Text icon display part
! Source icon display part
3
Exit Display Type Selection mode
Press the Control knob.
2
2
3
2
4
5
6
2
4
5
6
2
7
⁄
• To change the information by the Display Type, refer
to the page on the following table for the methods to
alternate by the Display Type.
Display Type A
Graphic 1 12
Status 2 11
Text 3 —
Upper 4
—
Middle 5 —
Lower 6
—
Text 7 —
G-Analyzer 9
—
Display Type A/ Display Type B

Status Setting

Determine whether the On and Off statuses of
various functions are to be displayed on the Display
Type A/B.
1
Enter Status Setting mode
Using the Control knob, select "DISP" >
"STATUS".
For the operation method, refer to <Function
Control mode> (page 10).
2
Select the Status display
Turn the Control knob.
3
Exit Status Setting mode
Press the Control knob.
B C D E
12 — — —
11 — — —
12 — — —
— 13 13 —
— 13 13 —
— 13 13 —
— — — 12
— — — —
|
English
F
—
—
—
—
—
—
—
15
11