Motorola MC67 Quick Start Manual

MC67
FEATURES
QUICK START
Note: Remove protective shipping film that covers the touch screen, exit window and
camera window before using.
GUIDE
12
1
2
3
4 (Note 1)
1 Scan/Action Button
2 Up/Down Button
3 Microphone
4 Power Button
5 I/O Connector
6 Keypad
7 Scan/Action Button
Note 1: To reset the MC67, press and hold the Power button for five (5) seconds.
13
14
9
15
10
11
16
17
8 23
22
7
21
18
6
20
19
13 Handstrap 19 Tether
5 14 Battery 20 Scan/Action Button
15 Battery Latch 21 Action Button
16 Camera Flash (optional) 22 Stylus
8 Touch Screen (with screen
17 Camera (optional) 23 Speaker
protector) 18 Exit Window (see Data
9 Data Capture LED
Capture Options)
10 Charging/Battery Status LED
11 WAN Radio Status LED
Notifications
12 Phone Speaker
Radio Status LED: Scan/Decode
Scan/Decode LED:
Charging/Battery Status
Red: Scanning active Green: RF active
Radio Status
Green: Good Decode
Charging/Battery Status LED:
Slow blinking amber: Battery charging
Solid amber: Fully charged
Fast blinking amber: Charging error
CARD INSTALLATION
3 3 3 3
MicroSD Card Installation (Optional)
2
2
4 3 2
2 4 3
5 1 5
1 1. Remove the handstrap.
2. Lift the rubber access door.
8 6
3. Slide the SIM card holder up to
10 9
9
unlock.
10
7
4. Lift the SIM card holder.
8 6
Carefully lift the microSD card holder.
5.
7
6. Insert the microSD card into the
Numeric Keypad Alpha-Numeric Keypad card holder.
Blue Key
3 3
2 NOTE :
Use this key to access function keys shown on the keypad
2
4 in blue. Proper position of the microSD card — the card
5
1 > Press the Blue key once to activate this state temporarily,
connector (i.e., gold contacts) should be facing out as
followed by another key.
6 > Press the Blue key twice to lock this state. shown.
> Press the Blue key a third time to unlock.
10 9
Orange Key
7. Gently lower the microSD card holder until it snaps
8 Use this key to access the secondary layer of characters
and actions. into place.
> Press the Orange key once to activate this state
temporarily, followed by another key.
> Press the Orange key twice to lock this state. SIM Card Installation
(Optional)
> Press the Orange key a third time to unlock.
DSD Keypad
3
Insert the SIM card into the SIM holder.
Blue Key 8.
4 3
9
Use this key to access function keys shown on the keypad
1
in blue. 5
NOTE :
> Press the Blue key once to activate this state, followed by
The proper position of the SIM card—the card
another key.
2 connector (i.e., gold area) should be facing outward
Orange Key 10
with the beveled corner facing away.
Use this key to access the secondary layer of characters.
> 2
Press the Orange key once to lock the keypad into
Alpha state. 2 2
9. Lower the SIM card holder.
>
Press the Orange key a second time to return to the
normal state. 10. Slide the SIM card holder down to lock into place.
PIM Keypad 11. Close the rubber access door.
12. Install the battery.
1 Talk 6 Orange Key
2 Navigation 7 Backlight
3 Soft Key 8 Blue Key
4 Scan/Action Button 9 OK
5 End 10 Start Menu
BATTERY INSTALLATION
microSD Card Holder
1. Insert the battery, bottom first, into the battery compartment.
2. Press down on the battery until the battery latch snaps into place.
3. Replace the handstrap.
SIM Card Holder
Rubber Access Door
2
1
3
2
3
CHARGING
Using the Single-slot USB Cradle
Use the Single-slot USB cradle or Four-slot
cradles (Charge Only or Ethernet) to
charge the battery in the MC67.
Also charge a spare battery using the
Single-slot cradle.
Charging/Battery Status LED
Slow Blinking Amber = Charging
Solid Amber = Fully charged
Fast Blinking Amber = Charging error
Using the Four-slot Cradles
Using the Four-Slot Spare Battery Charger
Use the Four-slot Battery Charger
to charge batteries separately.
Note:
The 3600 mAh battery
charges in less than six
hours.