Advertisement
Example
Activating
the function will display still images when the TV
is in standby mode.
Configures
Wallpaper
Mode settings.
Off:Nothing
will be displayed.
Picture:Still
images will be displayed when the TV is in
standby mode.
Clock:
The clock will be displayed when the TV is in
standby mode.
Configure
the clock settings. (For the UQ17U, TQ15U,
SQ17U, SQ15U, SQ10U and EQ10U models)
(See Daae 4-24.t
The clock mode can only be used when a network
connection has been established.
Finish configuring
the network settings.
After you set the time once, the clock will continue to
operate even if you disconnect
from the network.
However, you cannot switch the daylight saving time
setting when disconnected
from the network.
For the wallpaper,
you can select either the still images pre-
installed in the TV or your favorite still images stored in the
USB memory device.
Pre-lnstalled:
The images pre-installed
in the TV will be
displayed
in a slideshow.
UBB: Your favorite images stored for the wallpaper
will
appear.
If only a single still image is stored in the USB memory
device, that image will be displayed
as the wallpaper.
When there are multiple still images in the memory, all
the images will be displayed in a slideshow.
Images are displayed
in 3-minute
intervals as a
slideshow.
When the TV is in Wallpaper
mode, you can turn off the
TV by pressing and holding POWER on the TV for 5
seconds.
- Just before the TV turns off, the last image shown
when the TV was turned off appears
briefly.
- Your settings may not be saved in some cases.
When you display
images
by using the USB memory
device:
• Create a folder named "WP" in the root directory of the
USB memory device (the first directory when the USB
memory device is opened),
and store into the folder the
still images you want to display for the wallpaper.
• You must insert the USB memory device into the USB
terminal before turning off the TV.
• If there are images on the USB memory
device but they
do not appear on the screen, switch to USB mode and
check whether the image files on the USB memory
device are shown correctly.
You can set the length of time the TV will remain in the
Wallpaper
Mode.
3 hours/6 hours/12 hours/24
hours
• No buttons except for POWER work even while the still
images are being displayed.
• If the ready-for-use
USB memory device is not inserted,
the still images pre-installed
in the TV will be displayed
in
a slideshow even when "Data Source" is set to "USB".
• Because the USB memory device cannot be detected
immediately after the TV is turned on from standby
mode, the wallpaper
pre-installed
in the TV may be
displayed even when "Data Source" is set to "USB".
• The still images will be displayed
until the set time has
elapsed.
ENG 4-23
Advertisement
