Lubrication Points And Instructions - Epson L200 Service Manual

L200/L201/L100/L101

3.2 Lubrication Points and Instructions

Left side
Figure 3-1. Lubrication on Paper Support Assy (L200/L201)
Frame Base
Left side
EJ Roller
Bearing
Figure 3-3. Lubrication on EJ Roller
Maintenance
Right side
Lubrication Point
<Lubrication Point>
<Type>
G-71
<Application Amount>
1. 0.04g / point
2. Appropriate amount
3. Appropriate amount
<Remarks>
Apply with injector.
Lubrication Point
<Lubrication Point>
Rail of the Paper Support
Cross-section view
Assy
Lubrication area
<Type>
1 mm
G-74
<Application Amount>
Appropriate amount
<Remarks>
Apply with brush.
Keep the lubrication
within the rail. (No
grease outside of the
rail is allowed.)
1. Ribs (x20) of the
Frame Base
(contacting points with
the EJ Roller)
2. Bearings of the
Frame Base
(contacting points with
the EJ Roller)
3. Shaft on the right
side of the EJ Roller
35 mm
2 mm
Lubrication Points and Instructions
Lubrication Point
Figure 3-2. Lubrication on Scanner Unit
3.2 mm
Main Frame
13 mm
316.4 mm
5.1 mm
377.87 mm
5 mm
2 mm
6.6 mm
8.6 mm
Lubrication Point
Figure 3-4. Lubrication on Main Frame
Revision A
<Lubrication Point>
Shaft on the Scanner
Housing
<Type>
G-45 (TBD)
<Application Amount>
Appropriate amount
<Remarks>
Apply with brush.
Keep the lubrication
within the rail. (No
grease outside of the
rail is allowed.)
<Lubrication Point>
Contacting points (x5)
with the Carriage Unit
on the front side of the
Main Frame
Contacting points (x2)
with the Driven Pulley
Holder
<Type>
G-71
<Application Amount>
Appropriate amount
<Remarks>
Apply with injector.
Lubrication area:
Top side of the
Main Frame: 316.4
mm (x1)
Bottom side of the
Main Frame:
377.87 mm (x4)
39
Confidential