Epson L200 Service Manual page 40

L200/L201/L100/L101
<Lubrication Point>
Contacting points (x2)
with the Driven Pulley
<Type>
Driven Pulley Holder G-71
<Application Amount>
φ 1 mm x 1 mm
<Remarks>
Apply with injector.
Lubrication Point
Figure 3-5. Lubrication on Driven Pulley Holder
Left Pick Housing
Head Pick Housing
Right Pick Housing
Figure 3-8. Lubrication on LD Roller Assy
Maintenance
<Lubrication Point>
Sliding surface between
the Roller Idler Pick and
Spring Roller Idler Pick
<Type>
G-71
<Application Amount>
Appropriate amount
<Remarks>
Apply with brush.
Lubrication Point
Figure 3-6. Lubrication on Roller Idler Pick Assy
<Lubrication Point>
Contacting points (x5)
between the shafts and
bushings of the Head
Pick Housing
Contacting point (x1)
with the Right Pick
Housing
Contacting points (x3)
between the shafts and
bushings of the Left
Pick Housing
<Type>
G-71
<Application Amount>
Appropriate amount
<Remarks>
Apply with injector.
Lubrication Point
Lubrication Points and Instructions
Figure 3-7. Lubrication on PF Roller
Left side
Figure 3-9. Lubrication on Paper Support Assy (L100/L101)
Lubrication Point
Right side
Lubrication Point
Revision A
<Lubrication Point>
Ribs (x3) of the Frame
Base (contacting points
with the PF Roller)
<Type>
G-71
<Application Amount>
φ
1 mm x around shaft
(x 3)
<Remarks>
Apply with injector.
<Lubrication Point>
Rail of the Paper Support
Assy
<Type>
G-74
<Application Amount>
Appropriate amount
<Remarks>
Apply with brush.
Keep the lubrication
within the rail. (No
grease outside of the
rail is allowed.)
40
Confidential