Playback Of Disc; Basic Play - Kenwood DV-402 Instruction Manual

Playback of disc

Basic play

Preparation
÷ set the POWER ON/OFF switch to the ON (
position.
÷ When the POWER ON/OFF switch of the main unit
is left ON at all times, the power can be switched on
and off with the remote control unit.
1
Load a disc
MAIN UNIT
0
2
Start playback
MAIN UNIT
6
To stop playback
MAIN UNIT
7
POWER
ON OFF
)
REMOTE
REMOTE
REMOTE
POWER ( ) key
OPEN/CLOSE (0) key
ON/STANDBY key
STOP (7) key
PLAY (3) key
PAUSE (8) key POWER ON/ OFF switch
1 Open the tray.
2 Place a disc
3 Close the tray
÷ When the key is pressed, turns power automatically ON.
Then the tray opens.
When the key is pressed again, the tray closes. When the
PLAY/PAUSE (PLAY) key is pressed while a tray is open,
the tray closes automatically, and then playback begins.
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
When a menu screen is recorded on the
disc, the menu screen will be displayed
when the TOP MENU key is pressed. At
the menu screen, the menu can be se-
lected by pressing the Cursor keys.
TRACK No. (CD)
CHAPTER No. (DVD)
TITLE No. (DVD)
÷ If a disc has already been loaded in the tray
and the power is OFF, simply pressing the
PLAY/PAUSE (PLAY) key turns power auto-
matically ON and starts playback.
÷ Each press pauses and plays the disc alter-
nately
RESUME playback
When the STOP key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the STOP key is pressed
again during stop, the RESUME function is can-
celled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
DVF-3530 / DV-402
6 (PLAY/PAUSE) key
7 6
0
POWER
0 (open/close) key
7 (STOP) key
Label side
TOP MENU
Time display
ON/STANDBY
17