Initial Setup - Kenwood DDX7034BT Instruction Manual

Initial Setup

When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
Initial Setup
1 Turns the power On
2 Set each item
[Language] Select the language used for the
control screen and setting items. (page 64)
[Angle] You can adjust the position of the
monitor. (page 67)
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. (
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
( "OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": Switches to the rear camera video
display when "Reverse" gear is engaged
and then pressing the [AUD] button for
more than 1 second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 64).
[Color] Sets the screen and button illumination
color. (page 70)
[EXT SW] Setting up power specification of
the external device for which the power is
controlled from this unit. (page 67)
90 DNX7140/DNX7000EX/DDX714/DDX7034BT
3 End initial setup
⁄
• The settings above can be changed in
(page 63).
"iPod")
<Setup Menu>