Indicators And Projector Condition - Sanyo PLC-XP200L Service Manual

Chassis Description

Indicators and Projector Condition

Check the indicators for the projector condition.
The projector is operating normally.
Indicators
LAMP/ WARNING
POWER
SHUTTER
TEMP.
green
red/blue red
j j j
J j
❖
J j
❖
J j
❊
j j
❖
j j
❖
j
❖
j j
❊
J j
❊
J j
✽
Fig.1 Filter replacement icon and "Please wait..."
J
• • • on
• • • on (red)
❖
❊
• • • on (blue)
• • • dim
❖ • • • dim (red)
WARNING LAMP
FILTER REPLACE
orange orange
j j
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY
✽ ✽
button to turn on the projector.
The projector is operating normally.
✽ ✽
(The shutter is open)
The projector is operating normally.
✽ ✽
(The shutter is closed)
The projector is preparing for stand-by or the projection lamp
is being cooled down. The projector cannot be turned on until
✽ ✽
cooling is completed and the POWER indicator lights green.
The projection lamp is being cooled down in the Power
✽ ✽
management mode.
The projector is in the Power management mode.
✽ ✽
The projection lamp is being cooled down in the Shutter
✽ ✽
management mode.
The projector is in the Shutter management mode. Press the
✽ ✽
ON/STAND-BY button to turn on the projector.
✽
The filter is scrolled using the FILTER button on the remote
control or the Filter control function in the setting menu. When
the filter is being scrolled, the Filter replacement icon and
"Please wait..." message (Fig. 1) appear on the screen for
about 30 seconds.
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
❊ • • • blinking at the normal rate (blue
and dim red) (approx. 1 second
ON, 1 second OFF)
j
• • • off
✽
• • • Differ according to conditions.
Projector condition
• • • blinking fast
❊
• • • blinking fast
• • • blinking slow
-74-
(approx. 0.5 seconds ON, 0.5
seconds OFF)
(blue and dim red)
(approx. 0.5 seconds ON, 0.5
seconds OFF)
(approx.  seconds ON, 
seconds OFF)