Connecting Usb Devices; Connecting The Digitizer Pen (Ll-P202V) - Sharp LL-S242A-W Operation Manual

Connecting Devices
TIPS
• The length of the signal cables or surrounding environment
may affect the image quality.
• The video from the terminal that has signal input is
displayed. In this state, even if a signal is input from the
other terminal, the display is not switched. To switch the
display, use [Input Select] on the menu screen. (See page
25.)
• If the LCD monitor is turned on when there are input signals
from both terminals, the video from the DisplayPort input
terminal is displayed (factory default).
nUsing the touch panel
To use the touch panel, connect the monitor to a USB port on
a PC using the supplied USB cable.
Supplied USB cable
USB terminal
Touch panel terminal
Check the orientation of the connector and insert it horizontally
as far as it will go.

Connecting USB devices

When using a commercially available mouse, keyboard, or
other device, connect the device to the USB port.
USB terminal
Check the orientation of the connector and insert it horizontally
as far as it will go.
12
E
To USB port on PC
USB cable
Connecting the digitizer pen
(LL-P202V)
When using the supplied digitizer pen, connect the digitizer
pen cable.
Digitizer pen cable
Digitizer pen connection terminal
Check the orientation of the connector and insert it horizontally
as far as it will go.