Monitor Status Indicators - Sharp LL-S242A-W Operation Manual

Monitor Settings
n Disabling operation lock
1. Press the MENU button.
The menu screen is displayed.
2. While touching [Input Select], touch [Finger-only mode]
for at least 1 second.
Operation lock is disabled.
28
E

Monitor status indicators

The status is displayed on the right-side of the screen.
MENU button
Touch Mark
The touch mark displays the current touch action mode.
Press This mark is displayed during fi nger/pen mode.
When the digitizer pen is not connected,
When the digitizer pen is connected,
This mark is displayed during pen-only mode.
When the digitizer pen is not connected,
When the digitizer pen is connected,
This mark is displayed during fi nger-only mode.
Marks are displayed for about 5 seconds after changing
setting. You can also set marks to always be displayed. (See
page 26.)
Key Mark
When operation lock (See page 27) is set, the mark is
displayed for around 5 seconds when the screen is touched.
It can be set to display constantly. (See page 26.)
TIPS
• The display position can be changed from the menu
screen. (See page 26.)
• These marks are not displayed while the menu screen is
displayed.
Finger/pen mode
Pen-only mode
Finger-only mode
Touch Mark
Key Mark
appears.
appears.
appears.
appears.