Registration Of Equalizer Pattern - Kenwood G-EQ300 Instruction Manual

1 8

Registration of EQUALIZER pattern

1
Create a desired equalizer pattern.
See "Creation of desired equalizer patterns".
Any equalizer pattern can be preset if it is being dis-
played.
2
Preset the equalizer pattern.
1 Press the MEMORY key.
2 Press one of the preset keys.
To cancel the registered pattern
The registered equalizer pattern can be canceled and re-
turned to the original pattern stored under the preset key
(one of the factory-registered patterns M1 to M5 $).
1 Display the equalizer pattern.
2 Press and hold the preset key for more
4 5
3 MEMORY
Press while MEMORY is lighted up.
1 4
2 3
than 5 seconds.
1 4
2 3
5
¶Pattern is preset under the number of the numeric key pressed.
¶Up to five patterns can be preset in the same manner.
¶When a pattern has previously been preset under the numeric key
pressed, the newly preset pattern replaces the previous pattern.
5
Creation of desired equalizer patterns
"MEMORY" Lights up.
MEMORY
MEMORY
G-EQ300 (En/K)