Table of Contents
Advertisement
3.
Remove the power button board (2) with cable (the cable was disconnected from the system board
when removing the top cover).
Reverse this procedure to install the power button board.
TouchPad button board
Description
TouchPad button board (includes cable), Ash silver
TouchPad button board (includes cable), Ano silver
Before removing the TouchPad button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Service door (see
b.
Optical drive (see
c.
Top cover (see
Remove the TouchPad button board:
1.
Turn the top cover upside down, with the front toward you.
2.
Remove the two Phillips PM4.5x2.0 broadhead screws (1) that secure the TouchPad button board
bracket to the top cover.
46
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
29), and then remove the following components:
Service door on page
30)
Optical drive on page
32)
Top cover on page
39)
Spare part number
767256-001
767257-001
Hide quick links:
Advertisement
Table of Contents
