Table of Contents
Advertisement
c.
Top cover (see
d.
System board (see
Remove the fan:
1.
Turn the system board upside down, with the front toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Remove the Phillips P2.5x4.0 screw (2) that secures the fan to the system board.
4.
Remove the fan (3) from the system board.
Reverse this procedure to install the fan.
Top cover on page
39)
System board on page
49)
Component replacement procedures
53
Hide quick links:
Advertisement
Table of Contents
