Operating Buttons And Functions - Epson PS-500 Series User Manual

Operating buttons and functions

Contact Point
[A] Button
Start / Stop heart rate measurement.
[B] Button
Check recorded data. Hold down [B] to return to the previous screen.
Contact Point
Check that the contact points on the device are pointing up and match the contact marks on the cradle.
（
LEDs Blue & Orange
The LEDs on the PS-500 light up or flash to indicate the current heart rate zone.
If you set your target in PULSENSE View, you can check your progress while the measure is displayed on the
screen. You can cycle through the measurement by pressing the [B] Button.
「 」
TAP Operation
Tap the screen once to turn the backlight on.
Tap the screen twice to get into the main menu.
Battery icon, Bluetooth icon, Vibration icon
A Button
B Button
LEDs
）
Set up and Basic Operation  13