Epson PS-500 Series User Manual page 16

2
Charging the product.
2-1 Using a PC
Insert the cradle's into the USB port of your PC.
Please note that if you are connecting the cradle via a USB hub it may not charge.
In this case please connect directly to the USB port of the PC.
Note:
Some PC USB ports may not support the charging function.
2-2 Using an AC adapter
Connect the cradle with the AC adapter, and then insert the AC adapter into the power socket.
We recommend using the specified AC adapter (SFAC03 for UK and Ireland. SFAC02 for Europe excluding
UK and Ireland.)
Note:
- An orange LED will be shown while charging and the LED will change to blue when the PS-500 is fully
charged
- Charging takes approximately 1.5 to 2.5 hours to complete; however, the duration may vary.
! Important
- Please note that even if not used, the PS-500 should be charged at least once within a 6 month period.
Failing to do so might effect the performance of the rechargeable battery.
- The battery is not replaceable
Set up and Basic Operation  16