Advertisement
WorkForce
Pro WP-4532
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
2
Turn on
1
C onnect the power cord to the back of the printer and to an
electrical outlet.
Caution: Do not connect to your computer yet.
2
P ress the
power button.
*412238400*
*412238400*
3
Select settings
1
S panish is the default language of the LCD control panel.
To select it, press OK.
T o choose English, use the arrow buttons to select it
and press OK.
2
S elect your country and press OK.
3
S elect Summer if Daylight Saving Time is in effect
(spring through summer); otherwise, select Winter.
Press OK.
4
S elect the date format and press OK.
5
U se the numeric keypad to set the date and press OK.
6
Select 12h (
/
) or 24h and press OK.
AM
PM
7
Use the numeric keypad to set the time and press OK.
Note: You can change the date and time settings by pressing
Configurar, selecting Printer Setup, then selecting Date/Time.
4
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and don't
drink the ink.
1
O pen the front cover.
2
Unpack the four ink cartridges.
3
S hake each cartridge as shown for about 5 seconds.
4
I nstall each cartridge in the correct slot for its color. Push
each cartridge in until it clicks.
Advertisement
Related Manuals for Epson WorkForce Pro WP-4532
Summary of Contents for Epson WorkForce Pro WP-4532
- Page 1 WorkForce Pro WP-4532 ® Select settings Start Here S panish is the default language of the LCD control panel. To select it, press OK. Read these instructions before using your product. T o choose English, use the arrow buttons to select it and press OK. Unpack S elect your country and press OK. S elect Summer if Daylight Saving Time is in effect (spring through summer); otherwise, select Winter. Press OK. S elect the date format and press OK. U se the numeric keypad to set the date and press OK. Select 12h ( ) or 24h and press OK. Use the numeric keypad to set the time and press OK. Caution: Do not open ink cartridge packages until you are ready to Note: You can change the date and time settings by pressing install the ink. Cartridges are vacuum packed to maintain reliability. Configurar, selecting Printer Setup, then selecting Date/Time. Remove all tape and protective materials, including the foam and plastic inside the printer.
-
Page 2: Connect Fax Line
C lose the front cover. I nsert the paper with the printable side facedown. T he printer starts priming the ink. This takes about ote: Make sure the paper is loaded against the edge guide 12 minutes. When you see a confirmation message on and not sticking out from the end of the cassette. the product’s LCD screen, priming is complete. S lide the edge guides against the paper, but not too ote: The included cartridges prime the printer and print about tight. Make sure the paper is under the tabs on the edge 1000 black pages/900 color pages. Actual page count will vary. guides. aution: Don’t turn off the printer, open the cover, or detach the duplexer while it is priming or you’ll waste ink. W hen you see this menu on your product’s LCD screen, do not press the OK button yet. Continue with the instructions in the following sections to load paper in your product and install software. G ently insert the paper cassette at the bottom of the printer. Load paper in the cassette You can load letter-, A4-, or legal-size plain paper in the cassette. For instructions on loading envelopes and special paper in the rear MP tray, see the on-screen User’s Guide. ote: The paper may slide forward slightly as you insert the cassette. This is normal. P ull out the paper cassette. E xtend the output tray and raise the paper stopper as shown. (Do not raise the paper stopper for legal-size paper.) S lide the edge guides outward, and position them for the type of paper you are using. -
Page 3: Connection Options
Connection options Install software Wireless connection Note: If your computer does not have a CD/DVD drive, you can You must install the software on every computer from which download the software from the Epson website (see “Epson technical you want to print. For the first installation, we recommend support”). using a temporary USB cable connection to simplify wireless Caution: Be sure to close your other programs, including any screen setup. After the printer is connected to the network, you will savers and virus protection software, before beginning the software be prompted to remove the cable. installation. If you’re using Mac OS X 10.6 or 10.7, you will need to use M ake sure the printer is the control panel on the printer to select wireless settings. NOT CONNECTED to your Follow the instructions on your computer screen during computer. software installation; they will explain how to connect the printer wirelessly this way. M ake sure you know your network name (SSID) and network password: Windows : If you see a Found • Network name ® New Hardware screen, click • Network password Cancel and disconnect the USB cable. You can’t install your If you don’t have this information, contact the person who set software that way. -
Page 4: Epson Technical Support
User’s Guide. If you don’t have a User’s Guide icon, you can install it from the CD or go to the Epson website, as described below. Genuine EPSON inks Epson technical support L ook for the numbers below Visit global.latin.epson.com/Soporte where you can to find your cartridges. It’s as download English drivers for this product, view manuals, get easy as remembering your number! FAQs, or e-mail Epson (website available only in Spanish and Portuguese). WorkForce Pro WP-4532 ink cartridges You may also speak with a support specialist by calling: Color Standard-capacity High-capacity Argentina (54 11) 5167-0300 Mexico Black Bolivia* 800-100-116 Mexico City (52 55) 1323-2052 Chile (56 2) 484-3400...