Disassembly Method; Removing The Metal Cover - JVC MX-G50 Service Manual

Disassembly method

<Main body>

Removing the metal cover

1. Remove the three screws A
cover on the back of the body.
2. Remove the six screws B attaching the metal cover
on both sides of the body.
3. Remove the metal cover from the body by lifting the
rear part of the cover.
ATTENTION: Do not break the front panel tab fitted
to the metal cover.
(See Fig.1 to 3)
attaching the metal
A
A
Fig.1
B
Metal cover
B Fig.2
Metal cover
B
Fig.3
MX-G50/MX-G56
Metal cover
A
Optical out
only
MX-G50 J
MX-G56 C
B
1-5