Sony SLV-M10HF Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. VCR
  5. SLV-M10HF - Video Cassette Recorder
  6. Service manual
Sony SLV-M10HF Service Manual

Sony SLV-M10HF Service Manual

Hide thumbs Also See for SLV-M10HF:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
G
j
• Refer to the SERVICE MANUAL of VHS MECHANICAL
ADJUSTMENT
for MECHANICAL ADJUSTMENTS.
(9-921-647-11)
MICROFILM
SLV-M10HF
SPECIFICATIONS
VIDEO CASSETTE RECORDER
RMT-V249
US Model
Canadian Model
S MECHANISM

Advertisement

Table of Contents
loading

Related Manuals for Sony SLV-M10HF

Summary of Contents for Sony SLV-M10HF

  • Page 1 SLV-M10HF RMT-V249 SERVICE MANUAL US Model Canadian Model • Refer to the SERVICE MANUAL of VHS MECHANICAL ADJUSTMENT for MECHANICAL ADJUSTMENTS. S MECHANISM (9-921-647-11) SPECIFICATIONS VIDEO CASSETTE RECORDER MICROFILM...
  • Page 2 MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SERVICE NOTE PRINTED WIRING BOARDS AND ERROR CODE INDICATION ··········································· 5 SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM ································ 4-1 GENERAL 4-2. PRINTED WIRING BOARDS AND Getting Started SCHEMATIC DIAGRAMS ············································ 4-3 Unpacking ·············································································· 1-1 • MA-335 (REC/PB AMP, VIDEO, SERVO/SYSTEM Setting up the remote commander ·········································...
  • Page 4 ADJUSTMENTS MECHANICAL ADJUSTMENTS ································· 6-1 6-2. ELECTRICAL ADJUSTMENTS ··································· 6-1 2-1. PREPARATION BEFORE ADJUSTMENT ··················· 6-1 2-1-1. Equipment Required ························································ 6-1 2-1-2. Equipment Connection ···················································· 6-1 2-1-3. Input Signal Check ·························································· 6-1 2-1-4. Alignment Tape ······························································· 6-1 2-1-5. Input/Output Levels and Impedance ······························· 6-2 2-1-6.

  • Page 5: Service Note

    SLV-M10HF SERVICE NOTE 1. ERROR CODE INDICATION • Error codes are indicated using the lower 5 digits in the fluorescent display tube. “At this time, Colon “:” between character is not indicated.” Mode code indication when the error has occurred.

  • Page 6: General

    SLV-M10HF SECTION 1 This section is extracted GENERAL from instruction manual.
  • Page 15 1-10...
  • Page 16 1-11...
  • Page 17 1-12...
  • Page 18 1-13...
  • Page 19 1-14...
  • Page 20 1-15...
  • Page 21 1-16...
  • Page 22 1-17...
  • Page 23 1-18...
  • Page 24 1-19...
  • Page 25 1-20...
  • Page 26 1-21...
  • Page 27 1-22...
  • Page 28 1-23...
  • Page 29 1-24...
  • Page 30 1-25...
  • Page 31 1-26...
  • Page 32 1-27...
  • Page 33 1-28E...

  • Page 34: Disassembly

    SLV-M10HF SECTION 2 DISASSEMBLY NOTE: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE, FRONT PANEL BLOCK ASSEMBLY 1 Screws (case) Upper case 3 Connector From CN423 on MA-335 board 4 Hooks 1 Screws (case) 3 Flat cable...

  • Page 35: Power Block, Ma-335 Board

    2-4. POWER BLOCK, MA-335 BOARD (WITH S MECHANISM DECK) 1 Remove two screws securing NL holder and remove NL holder. 2 Connector (From CN201 on power block) 3 Screws 4 Power block 5 Screws 6 MA-335 board (with S mechanism deck) 2-5.

  • Page 36: Internal Views

    2-6. INTERNAL VIEWS — Top View — M901 Drum Assembly DZH-94A/Z-RP 8-839-044-02 ACE head block assembly A-6759-620-A Pinch press block assembly FE head A-6759-615-A 1-500-144-11 FL complete assembly A-6759-619-C Reel (T) table Reel (S) table 3-977-508-01 3-977-507-01 — Bottom View — M902 DC motor (capstan) 1-698-971-11...

  • Page 37: Circuit Boards Location

    2-7. CIRCUIT BOARDS LOCATION MA-335 NL-2 REC/PB AMP, VIDEO, AUDIO, (SMARTFILE) SERVO/SYSTEM CONTROL, TUNER AN-16 INNER SMARTFILE SENSOR/WRITER AJ-2 (LINE-2 IN) AN-17 FRONT SMARTFILE SENSOR POWER BLOCK SR821 FR-139 DM-81 (MODE CONTROL) (OPERATION SWITCHES) 2-4E...

  • Page 38: Block Diagrams

    SLV-M10HF SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (SEE PAGE 4-32) MA-335 BOARD (SEE PAGE 4-5,8,11,15,17,19,21,23,25) AJ-2 IC500 TU700 VHF/ Q560 BOARD VIDEO TUNER/MOD/IF RF VIDEO VIDEO CJ801 SO 0 CJ570 IC160 DRUM MOTOR LINE 2 L VIDEO 2...

  • Page 39: Video Block Diagram

    SLV-M10HF 3-2. VIDEO BLOCK DIAGRAM CJ570 LINE MA-335 BOARD (SEE PAGE 4-5,8,15,17,19) Q502 Q560 BUFFER BUFFER VIDEO IC501 !º REC/PB Q803 IC871 RF VIDEO TU700 5 TUNER SYNC BLOCK DET/SET (SEE PAGE Q871,872 503.5kHz Q875 0.65Vp-p 3-11) VIDEO BUFFER VIDEO...

  • Page 40: Servo/System Control Block Diagram

    SLV-M10HF 3-3. SERVO/SYSTEM CONTROL BLOCK DIAGRAM MA-335 BOARD (SEE PAGE 4-8, 11, 26) IC161 (2/2) SYSTEM CONTROL M12V SDA 0 I2C DATA1 IC360 41 D161 L161 DRUM MOTOR AVREF SCL 0 I2C CLOCK1 IC360 42 D109 CN101 AVDD M901 A MUTE...

  • Page 41: Audio Block Diagram

    SLV-M10HF 3-4. AUDIO BLOCK DIAGRAM (SEE PAGE 4-5, 21) MA-335 BOARD FM PB HF ADJ CHECK IC360 CN341 SW5V SW12V IC340 AUDIO PROCESSOR L341 (HIFI) REC/PB SW12V SW12V DRUM CJ570 AUDIO CN260 HEAD LINE MUTE AUDIO OUTPUT Q387 Q386 FM PB...

  • Page 42: Mode Control Block Diagram

    SLV-M10HF 3-5. MODE CONTROL BLOCK DIAGRAM NL-2 BOARD (SEE PAGE 4-34) (SEE PAGE 4-37) IC002 IC003 AN-17 MANCHESTER CODE MOD./DEMOD. BOARD SMARTFILE CONTROL /SERIAL TRANSFER CONTROL Q015 Q001-003,005 CNJ001 Q007,010,016,017 CN001 CN101 DSS IN CAR L+ CAR L- (FRONT) SCK1...

  • Page 43: Tuner Block Diagram

    SLV-M10HF 3-6. TUNER BLOCK DIAGRAM MA-335 BOARD SW5V (SEE PAGE 4-23) L704 L731 L703 TU700 TUNER/MOD/IF TU VIDEO IC201 32 VIDEO SPLITTER BLOCK IC733 (SEE PAGE 3-3) VHF/ ST/BILINGUAL PROCESSOR TU AUDIO L IC360 AUDIO BLOCK CH 4 TU AUDIO R...

  • Page 44: Power Supply Block Diagram

    SLV-M10HF 3-7. POWER SUPPLY BLOCK DIAGRAM IC002 MA-335 BOARD (SEE PAGE4-5,8,11,15,19,21,23,25) IC733 MANCHESTER TU700 IC003 CODE MOD./DEMOD. ST/BILNG SMARTFILE /SERIAL TRANSFER CONT. SMARTFILE PROCESSOR SENSOR BLOCK CONTROL AVREF IC001 IC004 CN603 R705 L604 EEPROM +30V CN165 CN003 PS001 SW12V IC601...

  • Page 45: Printed Wiring Boards And Schematic Diagrams

    SLV-M10HF SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM FRAME SCHEMATIC DIAGRAM...

  • Page 46: Printed Wiring Boards And Schematic Diagrams

    SLV-M10HF 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS There are few cases that the part printed on this diagram isn’t mounted in this model. MA-335 (REC/PB AMP, VIDEO, SERVO/SYSTEM CONTROL, AUDIO, TUNER) PRINTED WIRING BOARD — Ref. No.: MA-335 Board; 1,000 Series —...

  • Page 47: Rec/Pb Amp) Schematic Diagram

    SLV-M10HF MA-335 (REC/PB AMP) SCHEMATIC DIAGRAM — Ref. No.: MA-335 Board; 1,000 Series — MA-335 BOARD THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. MA-335 BOARD IC260 4 REC (In addition to this, the necessary note is...

  • Page 48: Video, Normal Audio

    SLV-M10HF MA-335 (VIDEO, NORMAL AUDIO) SCHEMATIC DIAGRAM — Ref. No.: MA-335 Board; 1,000 Series — • See page 4-3 for MA-335 BOARD printed wiring board. MA-335 BOARD !£ IC201 !∞ PB IC201 #• REC/ PB CN261 2 PB 2Vp-p 200mV/Div 0.1µsec/div...

  • Page 49: Servo/System Control

    SLV-M10HF MA-335 (SERVO/SYSTEM CONTROL) SCHEMATIC DIAGRAM • See page 4-3 for MA-335 BOARD printed wiring board. — Ref. No.: MA-335 Board; 1,000 Series — MA-335 BOARD !¶ @£ IC161 1 REC/PB IC161 ^• REC/PB !• IC161 5Vp-p 5Vp-p 30Hz 30Hz !ª...

  • Page 50: On Screen Display

    SLV-M10HF SLV-M10HF • See page 4-3 for MA-335 BOARD printed wiring board. MA-335 (ON SCREEN DISPLAY) SCHEMATIC DIAGRAM — Ref. No.: MA-335 Board; 1,000 Series — MA-335 BOARD @¶ @• @ª IC501 !º REC/PB IC500 9 REC/PB IC500 3, @∞ REC/PB...

  • Page 51: Dsf) Schematic Diagram

    SLV-M10HF MA-335 (DSF) SCHEMATIC DIAGRAM • See page 4-3 for MA-335 BOARD printed wiring board. — Ref. No.: MA-335 Board; 1,000 Series — MA-335 BOARD #º #¡ Q802 B PB Q810 E PB 0.2V/div 0.1V/div 0.1µsec/div 0.1µsec/div 4-17 4-18 MA-335 (5/10)

  • Page 52: V-Set) Schematic Diagram

    SLV-M10HF MA-335 (V-SET) SCHEMATIC DIAGRAM • See page 4-3 for MA-335 BOARD printed wiring board. — Ref. No.: MA-335 Board; 1,000 Series — MA-335 BOARD #™ IC871 #º REC/PB 4.8Vp-p 8MHz V-SET 4-19 4-20 MA-335 (6/10)

  • Page 53: Afm Audio

    SLV-M10HF MA-335 (AFM AUDIO) SCHEMATIC DIAGRAM • See page 4-3 for MA-335 BOARD printed wiring board. — Ref. No.: MA-335 Board; 1,000 Series — AFM AUDIO 4-21 4-22 MA-335 (7/10)

  • Page 54: Tuner) Schematic Diagram

    SLV-M10HF MA-335 (TUNER) SCHEMATIC DIAGRAM • See page 4-3 for MA-335 BOARD printed wiring board. — Ref. No.: MA-335 Board; 1,000 Series — TUNER 4-23 4-24 MA-335 (8/10)

  • Page 55: Power Supply, Av-Bus

    SLV-M10HF MA-335 (POWER SUPPLY, AV-BUS) SCHEMATIC DIAGRAM • See page 4-3 for MA-335 BOARD printed wiring board. — Ref. No.: MA-335 Board; 1,000 Series — POWER SUPPLY, AV-BUS 4-25 4-26 MA-335 (9/10) (10/10)
  • Page 56 SLV-M10HF FR-139 (MODE CONTROL) PRINTED WIRING BOARD There are few cases that the part printed on this diagram isn’t mounted in this model. — Ref. No.: FR-139 Board; 2,000 Series — FR-139 BOARD MA-335 NL-2 CN460 A-11 REC/PB AMP, VIDEO, AUDIO,...

  • Page 57: Schematic Diagram

    SLV-M10HF FR-139 (MODE CONTROL) SCHEMATIC DIAGRAM — Ref. No.: FR-139 Board; 2,000 Series — MODE CONTROL 4-29 4-30 FR-139...

  • Page 58: Operation Switches

    SLV-M10HF There are few cases that the part printed on this diagram isn’t mounted in this model. There are few cases that the part printed on this diagram isn’t mounted in this model. DM-81 (OPERATION SWITCHES) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM AJ-2 (LINE-2 IN) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM —...

  • Page 59: Smartfile

    SLV-M10HF AN-16 (INNER SMARTFILE SENSOR/WRITER), AN-17 (FRONT SMARTFILE SENSOR) PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS There are few cases that the part printed on this diagram isn’t mounted in this model. — Ref. No.: AN-16, AN-17 Board; 3,000 Series —...
  • Page 60 SLV-M10HF NL-2 (SMARTFILE) PRINTED WIRING BOARD There are few cases that the part printed on this diagram isn’t mounted in this model. — Ref. No.: NL-2 Board; 3,000 Series — NL-2 BOARD CN001 CN002 CN003 CN004 CNJ001 D001 D002 D003...
  • Page 61 SLV-M10HF NL-2 (SMARTFILE) SCHEMATIC DIAGRAM — Ref. No.: NL-2 Board; 3,000 Series — SMARTFILE 4-37 4-38 NL-2...
  • Page 62 SLV-M10HF POWER BLOCK SR821 (SWITCHING REGULATOR) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM There are few cases that the part printed on this diagram isn’t mounted in this model. — Ref. No.: SR821 Board; 9,000 Series — POWER BLOCK (SR821) T101 POWER TRANSFORMER...

  • Page 63: Interface, Ic Pin Function Description

    SLV-M10HF SECTION 5 INTERFACE, IC PIN FUNCTION DESCRIPTION...

  • Page 65: (Ma-335 Board Ic161)

    5-6. SERVO/SYSTEM CONTROL MICROPROCESSOR PIN FUNCTIONS (MA-335 BOARD IC161) Pin No. Pin Name Function Pin No. Pin Name Function RF SWP RF switching pulse output. Not used. AF REC P “H” when HiFi audio REC. AVSS — Unswitched ground. N.C. —...

  • Page 66: Tuner/Timer Mode Control Pin Functions

    5-7. TUNER/TIMER MODE CONTROL PIN FUNCTIONS (FR-139 BOARD IC460) Pin No. Pin Name Function Pin No. Pin Name Function N.C. Not used. SEG7 Segment terminal 7 POWER FAIL Power failure detect signal input. SEG8 Segment terminal 8. H DET_(TUNER H SYNC detect SEG9 Segment terminal 9.

  • Page 67: Mechanical Adjustments

    SLV-M10HF SECTION 6 ADJUSTMENTS 6-1 MECHANICAL ADJUSTMENTS 2-1-3. Input Signal Check Video signal produced by a pattern generator is used as an adjustment signal to perform electrical alignment for this unit. This video signal For the mechanical adjustments, please refer to the must satisfy the specification.

  • Page 68: Input/Output Levels And Impedance

    2-1-5. Input/Output Levels and Impedance 2-2. POWER SUPPLY CHECK Video input: LINE IN 2-2-1. Output Voltage Check (MA-335 Board) Input signal: 1Vp-p, 75ohms, unbalanced, Mode sync negative Measuring Instrument Digital voltmeter Video output: LINE OUT SW 12V Check Output signal: 1Vp-p, 75ohms, unbalanced, IC601 pin 2 sync negative Measurement point...

  • Page 69: Servo System Check

    2-3. SERVO SYSTEM CHECK Unless otherwise specified, set the switches to the following positions. • INPUT SELECT switch ........... LINE 1 • TAPE SPEED switch ..... SP (Remote commander) 2-3-1. RF Switching Position/ AF Switching Position Adjustments (MA-335 Board) [Adjustment Purpose] To adjust the link of the A-ch and B-ch of the tape playback outputs.

  • Page 70: Video System Checks

    2-4. VIDEO SYSTEM CHECKS 2-4-2. SYNC AGC Check (MA-335 Board) For the video system checks, follow the checking procedures given Mode below as a rule. The color bar video signal supplied from the pattern Signal Color bar generator is used as the video input signal for the video system IC201 pin #•...

  • Page 71: Recording Chroma Level Check (Ma-335 Board)

    2-4-4. Recording Chroma Level Check 2-5. AUDIO SYSTEM ADJUSTMENT (MA-335 Board) • For the adjustment of the audio system, perform in the SP mode if there is no special notes. Use the alignment tape. Mode Recording (SP) Signal Color bar [Connecting Instruments] IC201 pin !¢...

  • Page 72: Overall Noise Level Check

    2-5-3. Overall Output Level and Distortion Factor Check Mode Self-record playback Signal 400Hz, –7.5dBs : CJ570 Measurement point CJ570 Measuring instrument Audio level meter and Distortion meter Specified value Playback Level: –7.5 ± 3dBs Distortion: 4.0% or less [Check Method] 1) Input signal of 400Hz and –7.5dBs to the audio input.

  • Page 73: Adjusting Parts Location Diagram

    2-7. ADJUSTING PARTS LOCATION DIAGRAM MA-335 BOARD (CONDUCTOR SIDE) CJ570 LINE IN/OUT CN261 RF SW POS AF SW POS CN341 AF SW POS IC601 SW12V RV731 SEPARATION JS161 Q605 RF SW POS MTR12V AF SW POS Q603 SW5V 6-8E...

  • Page 74: Repair Parts List

    SLV-M10HF SECTION 7 REPAIR PARTS LIST 7-1. EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark ! or have some differences from the original one.

  • Page 75: Chassis Section

    7-1-2. CHASSIS SECTION not supplied supplied Q102 Q101 * AN holder (not supplied) * Antenna (small) shield plate (not supplied) not supplied * When peeling off the antenna (small) shield plate, be sure to apply it to the original position on the AN holder.

  • Page 76: Mechanism Deck-1

    7-1-3. MECHANISM DECK-1 #701 supplied #701 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-977-509-01 WASHER, THRUST 3-977-447-01 GEAR, ELEVATOR 3-977-507-01 TABLE, REEL (S) (GRAY) 3-977-514-01 OPENER, LID 3-977-508-01 TABLE, REEL (T) (BLACK) 3-977-441-01 GEAR, PINCH PRESSING 1-500-144-11 HEAD, FE 3-977-445-01 GEAR, TG8 ARM DRIVING 3-977-495-01 SHAFT TG2...

  • Page 77: Mechanism Deck-2

    7-1-4. MECHANISM DECK-2 #701 #701 #702 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks X-3947-581-1 BRAKE ASSY,MAIN(T) 3-965-178-01 SPRING 3-977-462-01 SPRING,EXTENTION. (MAIN BRAKE) 3-969-632-04 BASE, DRUM X-3947-573-1 ARM ASSY, PENDULUM A-6750-325-A SHUTTLE (T) BLOCK ASSY X-3947-580-2 BRAKE ASSY, MAIN(S) 3-977-501-01 PLATE, LUMINOUS 3-977-513-02 LEVER, REC.

  • Page 78: Mechanism Deck-3

    7-1-5. MECHANISM DECK-3 M902 #701 M903 #703 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-977-437-01 RETAINER,CAM MOTOR 3-977-439-01 GEAR, CAM X-3947-584-1 ASSY, REEL DIRECT 3-977-442-01 SLIDER 3-977-443-01 WASHER, STOPPER 3-977-455-01 GEAR, LOADING(T) 3-977-438-01 WORM - WHEEL 3-977-456-03 SPRING, TORSION (LOAD T) 3-977-506-01 ARM, LIMITTER SELECTION X-3947-579-1 LEVER ASSY, LOADING(T)

  • Page 79: Electrical Parts List

    AJ-2 AN-16 AN-17 DM-81 FR-139 7-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS When indicating parts by reference number, parts list may be different from the parts All resistors are in ohms. please include the board name. specified in the diagrams or the components METAL: metal-film resistor The components identified by mark ! or...
  • Page 80 FR-139 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C465 1-126-916-11 ELECT 1000uF 6.3V < RESISTOR > C466 1-163-038-00 CERAMIC CHIP 0.1uF C467 1-126-935-11 ELECT 470uF 6.3V R404 1-216-089-00 METAL CHIP 1/10W C468 1-163-038-00 CERAMIC CHIP 0.1uF R405 1-216-075-00 METAL CHIP...
  • Page 81 FR-139 MA-335 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < VIBRATOR > C219 1-164-159-21 CERAMIC 0.1uF C220 1-109-982-11 CERAMIC CHIP X460 1-760-494-11 VIBRATOR, CRYSTAL 16MHz C222 1-163-038-00 CERAMIC CHIP 0.1uF X461 1-579-463-11 VIBRATOR, CRYSTAL 32.768kHz C223 1-124-589-11 ELECT 47uF...
  • Page 82 MA-335 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C305 1-126-160-11 ELECT C509 1-164-505-11 CERAMIC CHIP 2.2uF C306 1-126-160-11 ELECT C511 1-163-229-11 CERAMIC CHIP 12PF C307 1-126-964-11 ELECT 10uF C512 1-163-235-11 CERAMIC CHIP 22PF C308 1-126-967-11 ELECT 47uF C513 1-164-232-11 CERAMIC CHIP...
  • Page 83 MA-335 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C872 1-163-019-00 CERAMIC CHIP 0.0068uF 10% D983 8-719-110-08 DIODE RD8.2ES-B2 C873 1-164-232-11 CERAMIC CHIP 0.01uF D984 8-719-110-08 DIODE RD8.2ES-B2 C874 1-163-038-00 CERAMIC CHIP 0.1uF C875 1-164-346-11 CERAMIC CHIP <...
  • Page 84 MA-335 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks JR038 1-216-295-00 METAL CHIP 1/10W < TRANSISTOR > JR039 1-216-296-00 METAL CHIP 1/8W JR040 1-216-296-00 METAL CHIP 1/8W Q101 8-729-043-84 TRANSISTOR PT380F3 JR041 1-216-296-00 METAL CHIP 1/8W Q102 8-729-043-84 TRANSISTOR PT380F3 JR043...
  • Page 85 MA-335 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R106 1-249-400-11 CARBON 1/4W F R230 1-216-045-00 METAL CHIP 1/10W R107 1-249-400-11 CARBON 1/4W F R231 1-216-071-00 METAL CHIP 8.2K 1/10W R108 1-249-421-11 CARBON 2.2K 1/4W F R232 1-249-420-11 CARBON 1.8K...
  • Page 86 MA-335 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R378 1-249-434-11 CARBON 1/4W R748 1-216-065-91 RES,CHIP 4.7K 1/10W R379 1-216-049-00 METAL CHIP 1/10W R749 1-216-049-00 METAL CHIP 1/10W R380 1-216-025-91 RES,CHIP 1/10W R801 1-216-049-00 METAL CHIP 1/10W R381 1-216-025-91 RES,CHIP...
  • Page 87 MA-335 NL-2 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R881 1-216-043-91 RES,CHIP 1/10W C029 1-124-234-00 ELECT 22uF R882 1-216-049-00 METAL CHIP 1/10W C030 1-163-251-11 CERAMIC CHIP 100PF R883 1-216-053-00 METAL CHIP 1.5K 1/10W C032 1-164-004-11 CERAMIC CHIP 0.1uF R884 1-216-047-91 RES,CHIP...
  • Page 88 NL-2 POWER BLOCK SR821 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < COIL > R033 1-216-063-91 RES,CHIP 3.9K 1/10W R035 1-249-398-11 CARBON 1/4W F L002 1-414-934-21 INDUCTOR 10uH R036 1-216-065-91 RES,CHIP 4.7K 1/10W L003 1-414-934-21 INDUCTOR 10uH R037 1-216-295-00 METAL CHIP...
  • Page 89 POWER BLOCK SR821 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < DIODE > ACCESSORIES & PACKING MATERIALS D103 8-719-920-32 DIODE ERA15-02 ******************************* D104 8-719-109-61 DIODE RD3.0ES D105 8-719-911-19 DIODE 1SS119 1-475-749-11 COMMANDER, STANDARD (RMT-V249) D106 8-719-904-05 DIODE 1N4005 1-696-592-11 CORD, CONNECTION (NTSC) (FOR RF) 1.5m D107...
  • Page 90 SLV-M10HF Sony Corporation 98D1637-1 Printed in Japan © 1998.4 9-921-684-11 Home A&V Products Company Published by Quality Assurance Dept. — 126 — (Osaki East)

Table of Contents