GE Monogram ZGU48N4G Installation Instructions Manual
48", 36" professional gas cooktops
Hide thumbs
Also See for Monogram ZGU48N4G:
- Owner's manual (28 pages) ,
- Installation instructions manual (12 pages) ,
- Installation instructions manual (12 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Installation
Instructions
If you have questions, call 800.GE.CARES or visit our website at: www.monogram.com
Professional Gas Cooktops
48" Natural Gas Models
ZGU48N4G
ZGU48N6R
ZGU48N6D
48" LP Gas Models
ZGU48L4G
ZGU48L6R
ZGU48L6D
36" Natural Gas Models
ZGU36N6
ZGU36N4R
ZGU36N4D
36" LP Gas Models
ZGU36L6
ZGU36L4R
ZGU36L4D
Advertisement
Table of Contents
Related Manuals for GE Monogram ZGU48N4G
Summary of Contents for GE Monogram ZGU48N4G
-
Page 1: Installation Instructions
Installation Instructions If you have questions, call 800.GE.CARES or visit our website at: www.monogram.com Professional Gas Cooktops 48" Natural Gas Models ZGU48N4G ZGU48N6R ZGU48N6D 48" LP Gas Models ZGU48L4G ZGU48L6R ZGU48L6D 36" Natural Gas Models ZGU36N6 ZGU36N4R ZGU36N4D 36" LP Gas Models... -
Page 2: Before You Begin
Installation Instructions BEFORE YOU BEGIN CAUTION: THESE COOKTOPS SHOULD BE INSTALLED Read these instructions completely and IN CONJUNCTION WITH A SUITABLE carefully. OVERHEAD VENT HOOD. Due to the high heat capacity • IMPORTANT Save these instructions for – of this unit, particular attention should be paid to the local inspector’s use. -
Page 3: Table Of Contents
ZGU36N4R – 4 gas burners and grill 48" Natural Gas Models: ZGU36N6 – 6 gas burners ZGU48N4G – 4 gas burners, grill and griddle 36" Liquid Propane Gas Models: ZGU48N6R – 6 gas burners and grill ZGU36L4D – 4 gas burners and griddle ZGU48N6D –... -
Page 4: Product Dimensions And Clearances
Design Information PRODUCT DIMENSIONS AND CLEARANCES 48" Wide Models 48" Wide Hood 47-7/8" 26-5/8" 13" Max. 8-7/16" 36" Min. to Refer to Hood Combustible Installation 12" Min. to Material From Instructions 18" Min. Combustible Cooking Allow Additional Clearance Material Surface Below the Cooktop Burner Each Side 17"... -
Page 5: Installation Options
Installation Preparation INSTALLATION OPTIONS ADVANCE PLANNING These cooktops can be installed in standard 24" or Refer to “Dimensions and Clearances” for appropriate deeper 25" cabinets. placement and necessary clearances when planning the installation. • In 24" deep cabinets, the front of the cooktop will project approximately 1-7/8"... -
Page 6: Installation Preparation
Installation Preparation TOOLS REQUIRED MATERIALS REQUIRED (not supplied) • Saw • Pipe and fittings as required • Measuring tape • Manual gas line shut-off valve • Carpenter’s square • Gas pressure regulator (supplied) • Large flat-blade screwdriver • Gas-resistant pipe joint sealant •... -
Page 7: Step 1 Remove Packaging
Installation STEP 1 REMOVE PACKAGING Use a hand-truck to move this cooktop. • Flatten the carton and use a piece as a pad on the bottom and back of the hand-truck. Lift the cooktop onto Before moving the cooktop indoors: the hand-truck standing on its end, with the bottom of the cooktop resting against the back of the hand-truck. -
Page 8: Step 3, Install The Cooktop
Installation STEP 3 INSTALL COOKTOP • Lower the cooktop into the opening. Make sure the cooktop is evenly seated and supported. A side frame gasket will seal the cooktop to the countertop. • “L” brackets with screws are provided to secure the cooktop to the countertop or to adjacent cabinetry. -
Page 9: Step 5 Connect Electrical
Installation STEP 5 CONNECT ELECTRICAL Plug power cord into properly grounded receptacle. STEP 6 ASSEMBLE BURNERS, CHECK IGNITION Assemble burners as shown. Check to be sure that burner heads and caps are securely seated. Pin(s) must Burner Cap completely engage holes to ensure proper assembly. Burner Head •... -
Page 10: Finalize Installation
Installation FINALIZE INSTALLATION Place the burner grates over the burners. Press corner The griddle has two leveling screws beneath the rear of the grate to the cooktop. The grates should be seated flue cover that can be used to adjust to the desired slope. and should not rock. -
Page 11: Install The Cooktop Backsplash Accessory
Installation INSTALL 9” or 12” HIGH BACKSPLASH Slots for Vertical Adjustment • Install and level the range or cooktop according to the Back section installation instructions. • Remove the backsplash packaging. Select the back, wall mount panel with mounting screw slots. 1/8"... - Page 12 NOTE: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram ® local service in your area, call 1.800.444.1845. NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice. Pub.