Turning On The Power - Hitachi CP-TW3003 User Manual

Turning on the power

1.
and correctly connected to the projector
and the outlet.
2. Make sure that the POWER indicator is
steady orange.
3. Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp lights up, and the
POWER indicator begins to blink green.
When the power is completely on, the
indicator will stop blinking and light in steady green.
WARNING
lamp lights, since the projection lamp ray may cause a trouble on your eyes.
Do not place the projector vertically. It could cause malfunction or injury.
Tabletop use must be set up with the designated optional accessories.
excessive force or an impact. Read the following important warnings carefully,
and follow them for your own safety.
touch a broken projection window, and contact your dealer.
NOTE
The projector has the DIRECT POWER ON function, which can make the projector
Never look into the projection window while the projection
STANDBY/ON button
POWER indicator
12
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
FOCUS D-ZOOM
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
DOWN OFF
KEYSTONE/
PERFECT FIT TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET