Turning Off The Power - Hitachi CP-TW3003 User Manual

Operation (continued)
NOTE
The ASPECT button does not work when no proper signal is inputted.
an operation is made. This is not a malfunction.

Turning off the power

Press the STANDBY/ON button on the
1.
projector or the remote control.
The message "Power off?" will appear on
the screen for about 5 seconds.
2. Press the STANDBY/ON button again while
the message appears.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will stop
blinking and light in steady orange when the
lamp cooling is complete.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
during use or just after use, since it is too hot.
close to the projector and easily accessible.
NOTE
Please power off the projector after any connected devices are
powered off.
Guide" in the CD.
STANDBY/ON button
POWER indicator
15
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
D-ZOOM
FOCUS
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
DOWN OFF
KEYSTONE/
PERFECT FIT TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET