Bosch DCN Next Generation Operation Manual page 196

Table of Contents

Advertisement

196
en | Configuration
Menu item
4E Ctrl Thresh.
4F Defaults
Table 7.19: Setup sub-menu (* = default)
Automatic gain control
Use the AGC menu item to enable or disable the AGC of the audio inputs. If necessary, enable
the AGC for the audio inputs that inject external interpretations in the system. The AGC makes
sure that the nominal level of the received interpretations is 9 dBV (XLR), -6 dBV (cinch).
When the nominal input of an external interpretation is high, the audio of the external
interpretations will be too loud compared to the audio of the 'internal' interpretations from
the interpreter desks.
Notice!
When channel 00 is assigned to an audio input, the system automatically disables AGC for the
audio input. You cannot manually enable AGC for an audio input to which channel 00 is
attached.
Notice!
If two systems are connected by audio connections (Cobranet, AEX, or DEX), set the AGC to
off.
7.6
LBB4404/00 Cobranet Interface
With the CobraNet Discovery, you can:
Notice!
We assume that you understand the basic theory of CobraNet networks.
Overview
Use the configuration menu of the cobranet interface to configure the cobranet interface.
Notice!
When the interlock is None (refer to DCN-IDESK Interpreter Desks, page 221 > Menu screens),
the audio inputs of the cobranet interface are disabled.
2013.11 | V2.0 | DCN-NG_OM_V4.x
Parameter
Signal:
Output 1
Output 2
Output 3
Output 4
---
Find the IP addresses of the devices that are connected to the CobraNet network with a
PC.
Change the IP addresses of the devices that are connected to the CobraNet network with
a PC.
Change the firmware of the devices that are connected to the CobraNet network with a
PC.
Value
Level:
-60 to -10 dB
-60 to -10 dB
-60 to -10 dB
-60 to -10 dB
---
Operation Manual
Conference System
Description
When an output is assigned
to an individual microphone
channel, the corresponding
contact is switched when
the level is above threshold.
Resets all of the units to
their factory defaults. The
unit name is not reset.
Bosch Security Systems B.V.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents