The Livepage; Image Selection - Bosch VideoJet X10 Installation And Operation Manual

VideoJet X10
6.2

The LIVEPAGE

Once the connection is established, the Web browser displays the LIVEPAGE. It displays the
live video image on the right of the browser window. Depending on the configuration, various
text overlays may be visible on the live video image (see Abschnitt 5.5 Display Stamping,
Seite 32).
Other information may be shown next to the live video image on the LIVEPAGE. The display
depends on the settings on the Livepage Configuration page (see Abschnitt 5.32 Livepage
Configuration, Seite 86).
6.2.1 Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VideoJet X10 can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.
6.2.2 Protected VideoJet X10
If the VideoJet X10 is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
NOTICE!
i
A VideoJet X10 offers the option to limit the extent of access using various authorization levels
(see Abschnitt 5.6 Password, Seite 34).
1.
2.
6.2.3

Image Selection

You can view the image from the camera in different displays.
Bosch Security Systems
Enter the user name and password in the corresponding text fields.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Click one of the tabs MPEG-4 Stream 1, MPEG-4 Stream 2 or M-JPEG below the video
image to toggle between the different displays of the camera image.
Installation and Operating Manual
Operation | en 97
V3.0 | 2007.09