Panasonic WV-SW396A Installation Manual page 34

Symptom
The power cable insulation is
damaged.
The power cable, plug and
connectors get hot during
use.
The power cable gets hot
when bent or stretched.
It is hard to see images with
the camera when there are
raindrops on the dome cover.
SW396A SW395A
About the live indicator
The live indicator will light or blink as follows depending on the camera status.
Operation status
When the power is turned on
During the standby or connection (Cable is not connected.)
During the standby or connection (Cable is connected.)
During the upgrade process
During the initialization
Port forwarding error caused by the UPnP function
Trouble happening on the camera
Failure in writing data on the SDHC/SD memory card
34
The power cable and connectors are worn out.
This may result in electric shock or a fire.
Unplug the power cable from the AC outlet immediately, and refer
to qualified service personnel.
The effectiveness of the rain wash coating may have been
reduced. Refer to "Cleaning this product body" in "Precautions for
use" and clean the dome cover. If the situation does not improve
contact your dealer.
Before the network
connection is established
When the network
connection is established
Cause/solution
Indicator status
Blinks orange
Blinks orange  Blinks green  Lights green
Lights orange
Lights green
Blinks orange
Blinks orange  Lights off
Blinks orange (in 2 seconds intervals (on for 1 second /
off for 1 second))
Blinks red
Lights red
Reference
pages
–
10