Pwa-Dwnld-350-Jig - Toshiba e-STUDIO163 Service Handbook
Hide thumbs
Also See for e-STUDIO163:
- Service manual (236 pages) ,
- Service handbook (235 pages) ,
- Operator's manual (162 pages)
Advertisement
6.1.1
PWA-DWNLD-350-JIG
[A] Update procedure
Important:
•
Turn OFF the power before installing and removing the download jig.
•
Do not turn OFF the power during the update. The data could be damaged and not be oper-
ated properly.
(1)
Write the data to the download jig.
P. 6-6 "6.1.2 Writing the data to the download jig (PWA-DWNLD-350-JIG)"
(2)
Turn OFF the power of the equipment.
(3)
Remove the rear cover.
(4)
Connect the download jig with the connector (CN1) on the MAIN board.
© December 2005 TOSHIBA TEC
Rear cover
Fig. 6-4
Connector
Fig. 6-5
e-STUDIO163/203 FIRMWARE UPDATING
6 - 3
6
Advertisement
Troubleshooting
