Toshiba e-STUDIO163 Service Handbook page 42

Classi-
Code
fication
358 ADF ADF sideways deviation
adjustment
359 Scanner Carriage position adjust-
ment during scanning from
ADF
365 ADF ADF leading
edge position
adjustment
401 Laser Fine adjustment of polygo-
nal motor rotation speed
(adjustment of primary
405
scanning direction repro-
duction ratio)
410 Laser Adjustment of primary
scanning laser writing start
position.
411
421 Drive Adjustment of
secondary
scanning
direction
reproduction
ratio
(fine adjust-
ment of main
motor speed)
424 Drive Fine adjust-
ment of exit
motor speed
e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
Adjustment mode (05)
Func-
Items
tion
ALL
ALL
for single - ALL
sided orig-
inal
PRT
PPC
PPC
PRT
PPC/
PRT
PPC/
PRT
2 - 22
06/04
Default
<Accept-
RAM
able
value>
128 SYS When the value
<0-255> increases by "1", the
image of original fed
from the ADF shifts
toward the rear side of
paper by approx.
0.169 mm.
During this adjustment,
the density LED blinks.
128 SYS When the value
<0-255> increases by "1", the car-
riage position when
using the ADF shifts by
approx. 0.1 mm toward
the original feeding side.
During this adjustment,
the density LED blinks.
50 SYS When the value
<0-100> increases by "1", the
copied image of original
fed from the ADF shifts
toward the trailing edge
of paper by approx.
0.2 mm.
During this adjustment,
the density LED blinks.
134 M When the value
<0-255> increases by "1", the
reproduction ratio of pri-
131 M
mary scanning direction
<0-255>
increases by approx.
0.07%. (approx. 0.1 mm/
step)
88 M When the value
<0-255> increases by "1", the writ-
ing start position shifts to
88 M
the front side by approx.
<0-255>
0.0423 mm.
When "1" is set at 08-
203, the adjustment
value set at 05-411 will
also be reflected to 05-
410.
128 M When the value
<0-255> increases by "1", the
reproduction ratio of sec-
ondary scanning direc-
tion increases by approx.
0.04%.
160 M When the value
<0-255> increases by "1", the
rotation becomes faster
by approx. 0.05%.
Proce-
Contents
dure
1
1
1
1
1
1
1
1
1
© December 2005 TOSHIBA TEC