1
g017334
1. Handle
3. Place your foot on the deck and tilt the machine
towards you (Figure 16).
g017329
4. Pull the recoil start handle.
Note: If the machine does not start after several attempts,
contact an Authorized Service Dealer.
Figure 15
2. Engine stop handle
Figure 16
Adjusting the Choke
2
Use the throttle assembly to adjust the choke (Figure 17).
1
2
1. Choke on
Stopping the Engine
Service Interval: Before each use or daily
To stop the engine, release the blade control bar (Figure 18).
Important: When you release the engine stop handle,
both the engine and blade should stop within 3 seconds.
If they do not stop properly, stop using your machine
immediately and contact an Authorized Service Dealer.
12
g017367
Figure 17
2. Choke off