Verifying System Requirements - Sharp MX-C312 Operation Manual

VERIFYING SYSTEM REQUIREMENTS

SYSTEM REQUIREMENTS
Before installing the software described in this manual, make sure that your computer satisfies the following
requirements.
Operating system Windows XP Professional
Windows Server 2003
WIndows 7
Computer type IBM PC/AT compatible computer
Equipped with a 10Base-T/100Base-TX/1000Base-T LAN board or
equipped standard with a USB 2.0/1.1*
Display 1024 x 768 dots resolution and 16-bit colour or higher is
recommended.
Other hardware An environment that allows any of the above operating systems to
requirements fully operate.
*1 Includes the 64-bit edition.
*2 Compatible with models preinstalled with Windows XP Professional, Windows XP Home Edition, Windows Server
2003, Windows Vista, Windows Server 2008 or Windows 7, and which are equipped standard with a USB interface.
*3 Cannot be used when the machine is connected with a USB cable. The PC-Fax driver and scanner driver cannot be
used.
For users of Windows XP/Server 2003/Vista/Server 2008/7
To perform the procedures described in this manual such as installing the software and configuring settings after installation,
administrator authority is required.
Windows
*1
, Windows XP Home Edition,
*1
, Windows Vista
*1
2
1-82
BEFORE USING THE MACHINE
*1 *1
, Windows Server 2008 ,
port.
3
Macintosh*
Mac OS X v10.4.11,
Mac OS X v10.5 to 10.5.8,
Mac OS X v10.6 to 10.6.5,
Mac OS X v10.7 to 10.7.3
An environment in which any
of the operating systems
listed above can fully
operate (including Macintosh
computers with an Intel
processor).
Contents