Using The Mk3100 Pole Mount Kit - Motorola MK3100 Product Reference Manual

2 - 10 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide

Using the MK3100 Pole Mount Kit

To mount the MK3100 to a pole using the Pole Mount Kit:
Insert the four shoulder screws provided into the mounting holes in the back of the MK3100.
1.
Connect the cables to the MK3100 and route and secure them properly. Position the power adapter behind
2.
the mounting plate. See
Secure the mounting plate to the pole mount bracket using the four mounting screws provided.
3.
Mount the MK3100 by placing the shoulder screws through the four keyholes on the mounting plate, and
4.
slide the MK3100 over and down to secure.
Mounting Screws (4)
Securing Pole Mount Bracket
Figure 2-8
Route the pole mount straps through the mounting bracket. Wrap them around the pole and tighten.
5.
Insert the locking screw through the hole in the tab at the side of the mounting plate. Hand tighten the
6.
screw to secure the MK3100.
Locking Screw
Inserting Locking Screw
Figure 2-9
Securing the Mounting Plate.
Shoulder Screws (4)
Mounting Plate
Pole Mount Bracket
Pole Mount Straps