LG PQCSW320A0E Quick Manual page 30

About AC Smart
Unit management (Unit registration, On/Off device registration, control interface
setting)
When you click on the [Unit management] button located below the system setting menu, the following
'Unit management' screen' will be displayed. In the unit management menu, you can register a newly
connected unit or edit/delete the unit of an existing Zone. Also you can automatically register the unit
through the unit search.
You can enter the information of the indoor unit,
ventilator or On/Off device to register or edit.
List of currently registered
indoor unit, ventilator and
On/Off device is displayed.
The following information must be entered to register the unit.
Item
Product type
Name
Address
Model
Capacity
Caution: Using unit management function Caution: Using unit management function
This function is the menu that can be set only by the installation expert during the This function is the menu that can be set only by the installation expert during the
installation of AC Smart. Note that the general user cannot and must not use this menu installation of AC Smart. Note that the general user cannot and must not use this menu
to reset the product. to reset the product.
30
AC Smart
controllers. You can also interface with other
AC Smart to control maximum of 128 units.
Select the type of unit (Air conditioner, ventilator, On/Off device).
Enter the name of the unit.
Enter the physical address of the unit. The physical address value is a
number between 00 and FF, and cannot be duplicated.
Enter the model of the unit.
Enter the maximum power consumption of the unit.
You can interface with external central
All connected units
are automatically
You can add a new unit
or edit/delete the
existing unit.
Description
searched and
registered.